Suppling one by one to the Inspection equipment accumulated solar cell wafers at a time by high speed.
「Solar cell wafer supply equipment to the inspection equipment」（Pat.）
It sends out without damaging one accumulated solar cell wafer at a time
at high speed, and supplies to the inspection equipment
By jetting air blow off from the non-contacting conveyance equipment
"FLOATCHUCK SK type" (patent) of the development of Solar Research
Laboratory Ltd. prepared in the upper part of the solar cell by which
laminating was carried out, space with the topmost solar cell wafer is
made to generate negative pressure and suction surfacing of the topmost
solar cell wafer is carried out. One surfacing solar cell wafer moves
at a time ahead according to a "FLOATCHUCK SK type" and the transfer
mechanism which aligned, and is sent out to the inspection equipment..
◎Adaptation
・Multi-crystal silicone solar cell wafe（□125mm □156mm、□200mm）
・Single-crystal-silicon solar cell wafer（□125mm □156mm、□200mm）
・Thin film solar cell
・ Amorphous solar cell
・ Film solar cell
◎Feature
・Suppling solar cell wafer
to the inspection equipmentat a time
・ Without a crack, dirt, and damage
・ High speed (0.5 seconds/(sheet)
・Without - two-sheet sending sent out
・Thickness are not asked.
