The "non-contacting support equipment" which consists of the
non-contact conveyance equipment "
FLOAT CHUCK" (patent) which hangs in the state of un-contacting. Aamorphous solar
cell, frexible printed circuit boards, and film has been used for this
equipment by jetting the air which our company developed. The equipment
sends out at a time one sheet which carried out the laminating of the sheets,
such asAamorphous solar cell, polarizing plate, a film, a sheet, a wafer,
glass, and paper, with non-contacting conveyance equipment "
FLOAT CHUCK" (patent), conveys so that a lappet may not arise in a tip part,
and accuracy improves laminating. Non-contacting conveyance equipment "FLOAT
CHUCK" carries out the film by non-contacting by jetting air. "the
sending-out mechanism by the air style" (patent) which used the
FLOAT CHUCK in the film sending-out part -- adopting -- a film -- every one sheet
-- certain -- sending out -- .
A conveyance part adopts a "
FLOAT CHUCK", and it can convey it in a conveyance course, without making a film
tip part produce hanging down. Therefore, reflection of the film using
the sensor and fault inspection of a penetration are possible.
The laminating part drops the film which has thin pliability by "The
non-contacting conveyer" constituted by non-contacting conveyance
equipment "
FLOAT CHUCK" in the level state, and improves [ accuracy ] it laminating at high
speed. In the film of this equipment, and the part which copes with it,
since non-contacting conveyance equipment "
FLOAT CHUCK" is used, there is no adhesion of a crack, dirt, stress, and static
electricity.
This equipment
1. Laminating Film Non-Contacting Sending Part
2. Film Non-Contacting Conveyance Part
3. Film Non-Contacting Piling Part
Non-contacting conveyance equipment "
FLOAT CHUCK" (patent) is adopted as each part of the above, and the work is handled
by non-contacting.
◎ Feature
1. Thin Film of Pliability is Possible.
2. Sheet of Breathability is Possible.
3. There is no adhesion of a crack and dirt.
4. It is possible
to take out one laminating sheet at a time.
◎ Adaptation
1. Amorphous Solar Cell -
2. Polarizing Plate
3. Film
4. Nonwoven Fabric
5. Paper
6. Wafer
